|
1. 해당 장치의 윈도우용 드라이버를 준비
-> 드라이버를 다운로드 해서 적당한 곳에 압축을 풉니다.
2. 작업하기 편하게 관리자 권한을 획득
$> sudo -l
3. ndiswrapper를 설치 (설치되어 있다면 스킵!)
$> apt-get install ndiswrapper-common ndiswrapper-utils-1.9
4. ndiswrapper를 사용해서 윈도우 드라이버를 설치
$> apt-get install ndiswrapper -i WlanUIG.inf
설치가 제대로 되었는지 확인해 보려면 다음 명령어를 입력합니다.
$> ndiswrapper -l | grep wlan
또는 ndiswrapper -l
제대로 설치가 됐다면 해당 드라이버가 설치되었다는 메시지가 나올겁니다.
5. 모듈간 의존성 생성
$> depmod -a
6. 커널에 ndiswrapper 모듈 등록
$> modprobe ndiswrapper
7. 설치완료
-- 추가 --
1. 이미 설치된 ndiswrapper 삭제 하기
sudo modprobe -r ndiswrapper
sudo apt-get --purge remove ndiswrapper-utils
sudo rm -r /etc/ndiswrapper/
sudo rm -r /etc/modprobe.d/ndiswrapper
sudo rm /lib/modules/$(uname -r)/kernel/drivers/net/ndiswrapper/ndiswrapper.ko
2. Source 컴파일
http://sourceforge.net/projects/ndiswrapper/ 가서 최신 Source 받을것
make uninstall
make
make install
3. 위의 과정처럼 설치 (생략)
4. 부팅시에도 계속 적용되게 하기
ndiswrapper -m
참고] USB2.0 Full speed 지원하려면 다음과 같이 부트로더에 acpi=noirq 를 넣어주면 된다.
title Ubuntu, kernel 2.6.15-25-386
root (hd0,1)
kernel /boot/vmlinuz-2.6.15-25-386 root=/dev/hda2 ro quiet splash acpi=noirq
|
|
|
'TECHNOLOGY > Unix & Linux' 카테고리의 다른 글
[Solaris] Run Level (init 0, 1, 2, 3, 4, 5, 6, S, s) (0) | 2011.02.24 |
---|---|
Ubuntu 유용한 프로그램 (0) | 2011.02.22 |
Unix 시스템 정보 출력 스크립트 (0) | 2011.02.19 |
crontab 사용법 (0) | 2011.02.13 |
Linux System 전체를 다른 파티션으로 복사하기 (0) | 2011.02.13 |